MY series: Rờ le kiếng

Specification

Operating Coils

Terminal Type			Classification			Numberof poles		Contacts		Without operationindicator		With operationindicator
Plug-in terminals			Standard models			2		Single		MY2		MY2N
						4		Single		MY4		MY4N
								Bifurcated		MY4Z		MY4ZN
			Models with built-in diode forcoil surge absorption(DC coil specification only)			2		Single		MY2-D		MY2N-D2
						4		Single		MY4-D		MY4N-D2
								Bifurcated		MY4Z-D		MY4ZN-D2
			Models with built-in CR circuitfor coil surge absorption(AC coil specification only)			2		Single		MY2-CR		MY2N-CR
						4		Single		MY4-CR		MY4N-CR
								Bifurcated		MY4Z-CR		MY4ZN-CR
Item		Rated current(mA)			Coilresistance(Ω)	Coil inductance (H)			Mustoperatevoltage(V)	Mustreleasevoltage(V)	Maximumvoltage(V)		Powerconsumption(VA, W)
Rated voltage(V)		50 Hz		60 Hz		ArmatureOFF	ArmatureON
AC	12	106.5		91	46	0.17	0.33		80%max.*1	30%min.*2	110% ofratedvoltage		Approx. 0.9to 1.3(at 60 Hz)
	24	53.8		46	180	0.69	1.3
	100/110	11.7/12.9		10/11	3,750	14.54	24.6
	110/120	9.9/10.8		8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8		5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3		4.2/4.6	18,790	83.5	136.4
DC	12	72.7			165	0.73	1.37			10%min.*2			Approx. 0.9
	24	36.3			662	3.2	5.72
	48	17.6			2,725	10.6	21.0
	100/110	8.7/9.6			11,440	45.6	86.2

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value (at a coil temperature of 23°C).*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.

Terminal Type			Classification			Numberof poles		Contacts		Without operationindicator		With operationindicator
Plug-in terminals			Standard models			2		Bifurcated		MY2Z		MY2ZN
			Models with built-in diode forcoil surge absorption(DC coil specification only)			2		Bifurcated		MY2Z-D		MY2ZN-D2
						3		Single		MY3-D		MY3N-D2
			Models with built-in CR circuitfor coil surge absorption(AC coil specification only)			2		Bifurcated		MY2Z-CR		MY2ZN-CR
Item		Rated current(mA)			Coilresistance(Ω)	Coil inductance (H)			Mustoperatevoltage(V)	Mustreleasevoltage(V)	Maximumvoltage(V)		Powerconsumption(VA, W)
Rated voltage(V)		50 Hz		60 Hz		ArmatureOFF	ArmatureON
AC	12	106.5		91	46	0.17	0.33		80%max.*1	30%min.*2	110% ofratedvoltage		Approx. 0.9to 1.3(at 60 Hz)
	24	53.8		46	180	0.69	1.3
	100/110	11.7/12.9		10/11	3,750	14.54	24.6
	110/120	9.9/10.8		8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8		5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3		4.2/4.6	18,790	83.5	136.4
DC	12	75			160	0.73	1.37			10%min.*2			Approx. 0.9
	24	36.9			650	3.2	5.72
	48	18.5			2,600	10.6	21.0
	100/110	9.1/10			11,000	45.6	86.2

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.

Terminal Type

Classification

Number of poles

Contacts

With latching lever

Plug-in terminals

Standard models

2

Single

MY2IN(S)

4

Single

MY4IN(S)

Bifurcated

MY4ZIN(S)

Models with built-in diode forcoil surge absorption(DC coil specification only)

2

Single

MY2IN-D2(S)

4

Single

MY4IN-D2(S)

Bifurcated

MY4ZIN-D2(S)

Models with built-in CR circuitfor coil surge absorption(AC coil specification only)

2

Single

MY4IN-CR(S)

4

Bifurcated

MY4ZIN-CR(S)

Item

Rated current(mA)

Coilresistance(Ω)

Coil inductance (H)

Mustoperatevoltage(V)

Mustreleasevoltage(V)

Maximumvoltage(V)

Powerconsumption(VA, W)

Rated voltage(V)

50 Hz

60 Hz

ArmatureOFF

ArmatureON

AC

100/110

11.7/12.9

10/11

3,750

14.54

24.6

80%max.*1

30%min.*2

110% ofratedvoltage

Approx. 0.9to 1.3(at 60 Hz)

200/220

6.2/6.8

5.3/5.8

12,950

54.75

94.07

DC

12

75

160

0.73

1.37

10%min.*2

Approx. 0.9

24

37.7

636

3.2

5.72

48

18.8

2,560

10.6

21

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC.To ensure release, use a value that is lower than the specified value.

Terminal Type			Classification		Numberof poles		Contacts		Without operationindicator			With operationindicator
Plug-in terminals			Standard models		3		Single		MY3			MY3N
					4		Crossbar bifurcated		MY4Z-CBG			MY4ZN-CBG
PCB terminals			Standard models		2		Single		MY2-02			—
					3		Single		MY3-02			—
					4		Single		MY4-02			—
							Bifurcated		MY4Z-02			—
Case-surfacemounting			Standard models		2		Single		MY2F			—
					3		Single		MY3F			—
					4		Single		MY4F			—
							Bifurcated		MY4ZF			—
Item		Rated current(mA)			Coilresistance(Ω)	Coil inductance (H)		Mustoperatevoltage(V)		Mustreleasevoltage(V)	Maximumvoltage(V)		Powerconsumption(VA, W)
Rated voltage(V)		50 Hz		60 Hz		ArmatureOFF	ArmatureON
AC	12	106.5		91	46	0.17	0.33	80%max.*1		30%min.*2	110% ofratedvoltage		Approx. 0.9to 1.3(at 60 Hz)
	24	53.8		46	180	0.69	1.3
	100/110	11.7/12.9		10/11	3,750	14.54	24.6
	110/120	9.9/10.8		8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8		5.3/5.8	12,950	54.75	94.07
	220/240	4.8/5.3		4.2/4.6	18,790	83.5	136.4
DC	12	75			160	0.73	1.37			10%min.*2			Approx. 0.9
	24	36.9			650	3.2	5.72
	48	18.5			2,600	10.6	21.0
	100/110	9.1/10			11,000	45.6	86.2

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and inductance values are reference values only (at 60 Hz).3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum.To ensure operation, apply at least 80% of the rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensurerelease, use a value that is lower than the specified value.Contact Ratings

Number ofpoles(contactconfiguration)

2-pole (DPDT)

3-pole (3PDT)

Contactstructure

Single

Bifurcated

Single

With latching lever (S)

Load

Resistiveload

Inductiveload(cos φ = 0.4,L/R = 7 ms)

Resistiveload

Inductiveload(cos φ = 0.4,L/R = 7 ms)

Resistiveload

Inductiveload(cos φ = 0.4,L/R = 7 ms)

Resistiveload

Inductiveload(cos φ = 0.4,L/R = 7 ms)

Rated load

5 A at220 VAC5 A at24 VDC

2 A at220 VAC2 A at24 VDC

5 A at250 VAC5 A at30 VDC

2 A at250 VAC2 A at30 VDC

5 A at220 VAC5 A at24 VDC

2 A at220 VAC2 A at24 VDC

5 A at220 VAC5 A at24 VDC

2 A at220 VAC2 A at24 VDC

Rated carrycurrent*1

5 A (10 A*2)

5 A

5 A

Maximumswitchingvoltage

250 VAC, 125 VDC

250 VAC, 125 VDC

Maximumswitchingcurrent

5 A

10 A

5 A

5 A

Maximumswitchingpower

1,100 VA120 W

440 VA48 W

2,500 VA300 W

500 VA60 W

1,100 VA120 W

440 VA48 W

1,100 VA120 W

440 VA48 W

Contactmaterial

Ag

Au plating + Ag

Ag

Number of poles (contact configuration)

4-pole (4PDT)

Contact structure

Single

With latching lever (S)

Load

Resistive load

Inductive load(cos φ = 0.4,L/R = 7 ms)

Resistive load

Inductive load(cos φ = 0.4,L/R = 7 ms)

Rated load

3 A at 220 VAC3 A at 24 VDC

0.8 A at 220 VAC1.5 A at 24 VDC

3 A at 250 VAC3 A at 30 VDC

0.8 A at 250 VAC1.5 A at 30 VDC

Rated carry current*1

3 A (5 A*2)

Maximum switching voltage

250 VAC, 125 VDC

Maximum switching current

3 A

Maximum switching power

660 VA72 W

176 VA36 W

1,250 VA150 W

200 VA45 W

Contact material

Au cladding + Ag alloy

 

Number of poles(contact configuration)	4-pole (4PDT)
Contact structure	Bifurcated				Crossbar bifurcated (CBG)
			With latching lever (S)
Load	Resistiveload	Inductive load(cos φ = 0.4,L/R = 7 ms)	Resistiveload	Inductive load(cos φ = 0.4,L/R = 7 ms)	Resistiveload	Inductive load(cos φ = 0.4,L/R = 7 ms)
Rated load	3 A at220 VAC3 A at24 VDC	0.8 A at220 VAC1.5 A at24 VDC	3 A at250 VAC3 A at30 VDC	0.8 A at250 VAC1.5 A at30 VDC	1 A at220 VAC1 A at24 VDC	0.3 A at220 VAC0.5 A at24 VDC
Rated carry current*1	3 A (5 A*2)				1 A
Maximum switchingvoltage	250 VAC, 125 VDC
Maximum switchingcurrent	3 A				1 A
Maximum switchingpower	660 VA72 W	176 VA36 W	1,250 VA150 W	200 VA45 W	220 VA24 W	66 VA12 W
Contact material	Au cladding + Ag alloy				Au cladding + AgPd

*1.If you use a Socket, do not exceed the rated carry current of the Socket.*2.Values shown in parentheses are for the MY[](S) model with latching lever.Characteristics

Number of poles (contact configuration)		2-pole (DPDT)		3-pole (3PDT)
Contact structure		Single	Bifurcated	Single
Contact resistance*1 *2		50 mΩ max.
Operate time*3		20 ms max.
Release time*3		20 ms max.
Maximumswitchingfrequency	Mechanical	18,000 operations/h
	Rated load	1,800 operations/h
Insulation resistance*4		100 MΩ min.
Dielectricstrength	Between coil and contacts	2,000 VAC, 50/60 Hz for 1 min
	Between contacts ofdifferent polarity
	Between contacts ofthe same polarity	1,000 VAC at 50/60 Hz for 1 min
Vibrationresistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shockresistance	Destruction	1,000 m/s2
	Malfunction	200 m/s2
Endurance	Mechanical	AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h)	AC: 50,000,000operations min.DC: 50,000,000operations min.(switching frequency:18,000 operations/h)	AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h)
	Electrical*5	500,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h)	200,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h)	500,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h)
Failure rate P value (reference value)*6		1 mA at 5 VDC	100 μA at 1 VDC	1 mA at 5 VDC
Weight		Approx. 35 g	Approx. 35 g	Approx. 35 g
Number of poles (contact configuration)		4-pole (4PDT)
Contact structure		Single	Bifurcated	Crossbar bifurcated(CBG)
Contact resistance*1 *2		50 mΩ max.		100 mΩ max.
Operate time*3		20 ms max.
Release time*3		20 ms max.
Maximumswitchingfrequency	Mechanical	18,000 operations/h
	Rated load	1,800 operations/h
Insulation resistance*4		100 MΩ min.
Dielectricstrength	Between coil and contacts	2,000 VAC, 50/60 Hz for 1 min
	Between contacts ofdifferent polarity
	Between contacts ofthe same polarity	1,000 VAC at 50/60 Hz for 1 min		700 VAC at 50/60 Hzfor 1 min
Vibrationresistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shockresistance	Destruction	1,000 m/s2
	Malfunction	200 m/s2
Endurance	Mechanical	AC: 50,000,000operations min.DC: 100,000,000operations min.(switching frequency:18,000 operations/h)	AC: 20,000,000operations min.DC: 20,000,000operations min.(switching frequency:18,000 operations/h)	AC: 50,000,000operations min.DC: 50,000,000operations min.(switching frequency:18,000 operations/h)
	Electrical*5	200,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h)	100,000 operationsmin.(rated load, switchingfrequency: 1,800operations/h)	50,000 operations min.(rated load, switchingfrequency: 1,800operations/h)
Failure rate P value (reference value)*6		1 mA at 1 VDC	100 μA at 1 VDC	100 μA at 1 VDC
Weight		Approx. 35 g	Approx. 35 g	Approx. 35 g

Note: The data shown above are initial values.*1.Models with latching lever are 100 mΩ maximum.*2.Measurement conditions: 1 A at 5 VDC using the voltage drop method.*3.Measurement conditions: With rated operating power applied, not including contact bounce.*4.Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.*5.Ambient temperature condition: 23°C*6.This value was measured at a switching frequency of 120 operations per minute.

Classification	Standard models					Models with built-in diode for coilsurge absorption (-D)/ Models withbuilt-in CR circuit for coil surgeabsorption (-CR)
Contacts	Single/bifurcated			Crossbar/bifurcated(CBG)		Single/bifurcated
Features	Withoutoperationindicator	With operation indicator		Withoutoperationindicator	Withoperationindicator	Withoutoperationindicator	With operation indicator
			Withlatchinglever					Withlatchinglever
Ambientoperatingtemperature*1	-55 to70°C	-55 to 60°C*2	-55 to 70°C	-25 to70°C	-25 to60°C	-55 to60°C *2	-55 to 60°C*2	-55 to 70°C
Ambientoperatinghumidity	5% to 85%					5% to 85%

*1.With no icing or condensation.*2.This limitation is due to the diode junction temperature and elements used.Certified StandardsUL certification (File No. E41515)

Model	Standardnumber	Category	Listed/Recognized	OperatingCoil ratings	No. ofpoles	Contact ratings	Certifiednumber ofoperations
MY2MY2NMY2IN(S)MY2N-D2MY2-D2MY2IN-D2(S)MY2-CRMY2N-CR	UL508	NRNT2	Recognition	6 to 240 VAC6 to 125 VDC	2	10 A, 250 VAC (General Use)10 A, 30 VDC (General Use)7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive)3 A, 265 VAC (Resistive)	6,000
						1/6 HP, 250 VAC1/8 HP, 265 VAC1/10 HP, 120 VAC	1,000
						B300 Pilot Duty(Same polarity)	6,000
MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR	UL508	NRNT2	Recognition	6 to 240 VAC6 to 125 VDC	2	7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive)3 A, 265 VAC (Resistive)	6,000
						1/6 HP, 250 VAC1/8 HP, 265 VAC1/10 HP, 120 VAC	1,000
						B300 Pilot Duty(Same polarity)	6,000
MY3MY3NMY3-DMY3N-D2MY3-02MY3F	UL508	NRNT2	Recognition	6 to 240 VAC6 to 125 VDC	3	5 A, 28 VDC (Resistive)5 A, 240 VAC (General Use)	6,000
						1/6 HP, 250 VAC	1,000
MY4MY4NMY4IN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S)MY4-02MY4FMY4Z-02MY4ZF	UL508	NRNT2	Recognition	6 to 240 VAC6 to 125 VDC	4	5 A, 28 VDC (General Use)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)(Same polarity)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)(Same polarity)	6,000
						1/6 HP, 250 VAC(Same polarity)1/10 HP, 120 VAC(Same polarity)	1,000
						B300 Pilot Duty(Same polarity)	6,000

CSA certification (File No. LR31928)

Model	Standardnumber	Classnumber	OperatingCoil ratings	No. ofpoles	Contact ratings	Certifiednumber ofoperations
MY2MY2NMY2IN(S)MY2N-D2MY2-D2MY2IN-D2(S)MY2-CRMY2N-CR	C22.2 NO.0,No.14		6 to 240 VAC6 to 125 VDC	2	7 A, 240 VAC (Resistive)7 A, 24 VDC (Resistive)5 A, 240 VAC (General Use)5 A, 250 VAC (Resistive)5 A, 30 VDC (Resistive)	6,000
					1/6 HP, 250 VAC (Same polarity)1/10 HP, 120 VAC (Same polarity)	1,000
MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR	C22.2 NO.0,No.14		6 to 240 VAC6 to 125 VDC	2	7 A, 240 VAC (General Use)(Same polarity)7 A, 24 VDC (Resistive)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)	6,000
					1/6 HP, 250 VAC1/10 HP, 120 VAC	1,000
MY3MY3NMY3-DMY3N-D2MY3-02MY3F	C22.2 NO.0,No.14		6 to 240 VAC6 to 125 VDC	3	5 A, 28 VDC (Resistive)5 A, 240 VAC (General Use)7 A, 240 VAC (General Use)7 A, 24 VDC (Resistive)	6,000
					1/6 HP, 250 VAC	1,000
MY4MY4NMY4N(S)MY4-DMY4N-D2MY4IN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CMY4ZN-CRMY4ZIN-CR(S)	C22.2 No.14	3211 07	6 to 240 VAC6 to 125 VDC	4	5 A, 240 VAC (General Use)(Same polarity)5 A, 28 VDC (General Use)(Same polarity)5 A, 250 VAC (Resistive)(Same polarity)5 A, 30 VDC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)(Same polarity)	6,000
					1/6 HP, 250 VAC (Same polarity)1/10 HP, 120 VAC (Same polarity)	1,000
					B300 Pilot Duty (Same polarity)	6,000
MY4-02MY4FMY4Z-02MY4ZF	C22.2 NO.0,No.14	3211 07	6 to 240 VAC6 to 125 VDC	4	7 A, 240 VAC (General Use)(Same polarity)7 A, 24 VDC (Resistive)(Same polarity)5 A, 240 VAC (General Use)(Same polarity)5 A, 30 VDC (Resistive)5 A, 250 VAC (Resistive)(Same polarity)0.2 A, 120 VDC (Resistive)	6,000
					1/6 HP, 250 VAC1/10 HP, 120 VAC	1,000

TÜV Rheinland certification (Certification No. R50030059)

Model	Operating Coil ratings	Contact ratings	Certified number of operations
MY2ZMY2ZNMY2-02MY2FMY2Z-DMY2Z-D2MY2Z-CRMY2ZN-CR	6 to 125 VDC,6 to 240 VAC	5 A, 250 VAC (cos φ = 1.0)	100,000
MY3MY3NMY3-DMY3N-D2MY3-02MY3F		5 A, 250 VAC (cos φ = 1.0)0.8 A, 250 VAC (cos φ = 0.4)
MY4-02MY4FMY4Z-02MY4ZF		3 A, 120 VAC (cos φ = 1.0)0.8 A, 250 VAC (cos φ = 0.4)

CE Marking

Model	EMC Directive	Low Voltage Directive	Machinery Directive	Safety Category
MY2MY2NMY2IN(S)MY2ZMY2ZNMY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CRMY2Z-CRMY2ZN-CRMY2Z-DMY2ZN-D2MY2F	Not applicable	Applicable	Not applicable	1
MY3MY3NMY3-DMY3N-D2MY3F
MY4MY4NMY4IN(S)MY4ZMY4ZNMY4ZIN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4-CRMY4N-CRMY4Z-CRMY4ZN-CRMY4FMY4ZF

LR certification (Lloyd’s Register)

Model	File No.	EnvironmentalCategory	OperatingCoil ratings	Contact ratings	Certified numberof operations
MY2MY2NMY2IN(S)MY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CR	File No.98/10014	ENV2,3	6 to 240 VAC6 to 125 VDC	10 A, 250 VAC (Resistive)2 A, 250 VAC (PF0.4)10 A, 30 VDC (Resistive)2 A, 30 VDC (L/R = 7 ms)	MY2:50,000
MY2ZMY2ZNMY2Z-DMY2ZN-D2	File No.90/10270	ENV2,3	6 to 240 VAC6 to 125 VDC	2 A, 30 VDC inductive load2 A, 200 VAC inductive load	MY2:50,000
MY4MY4NMY4IN(S)MY4-DMY4N-D2MY4IN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4ZMY4ZNMY4ZIN(S)MY4Z-DMY4ZN-D2MY4ZIN-D2(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S)	File No.98/10014	ENV2,3	6 to 240 VAC6 to 125 VDC	5 A, 250 VAC (Resistive)0.8 A, 250 VAC (PF0.4)5 A, 30 VDC (Resistive)1.5 A, 30 VDC (L/R = 7 ms)	MY4:50,000

VDE certification

Model	Standardnumber	Certification No.	OperatingCoil ratings	Contact ratings	Certified numberof operations
MY2MY2NMY2IN(S)MY2-DMY2N-D2MY2IN-D2(S)MY2-CRMY2N-CR	EN 61810-1	112467UG	6, 12, 24,48/50,100/110,110/120,200/220,220/240 VAC6, 12, 24,48, 100/110,125 VDC	10A, 250 VAC (cos φ = 1)10A, 30 VDC (L/R = 0 ms)	MY2:100,000MY4:100,000MY4Z:50,000 (AC)
MY4MY4NMY4IN(S)MY4ZMY4ZNMY4ZIN(S)MY4-DMY4ZN-D2MY4IN-D2(S)MY4Z-DMY4Z-D2MY4ZIN-D2(S)MY4-CRMY4N-CRMY4IN-CR(S)MY4Z-CRMY4ZN-CRMY4ZIN-CR(S)			6, 12, 24,48/50,100/110,110/120,200/220,220/240 VAC6, 12, 24,48, 100/110,125 VDC	5 A, 250 VAC (cos φ = 1)5 A, 30 VDC (L/R = 0 ms)

MYK Miniature Power Latching RelaysRatingsOperating coil (AC)

Ratedvoltage(V)		Set coil			Reset coil			Mustoperatevoltage(V)	Mustreleasevoltage(V)	Maximumvoltage(V)	Power consumption(VA, W)
		Rated current(mA)		Coilresistance(Ω)	Rated current(mA)		Coilresistance(Ω)				Set coil	Reset coil
		50 Hz	60 Hz		50 Hz	60 Hz
AC	12	57	56	72	39	38.2	130	80%max.*	80%max.	110%max. ofratedvoltage	Approx.0.6 to0.9 (at60 Hz)	Approx.0.2 to0.5 (at60 Hz)
	24	27.4	26.4	320	18.6	18.1	550
	100	7.1	6.9	5,400	3.5	3.4	3,000
DC	12	110		110	50		235				Approx.1.3	Approx.0.6
	24	52		470	25		940
	48	27		1,800	16		3,000

Note: 1. The rated current for AC is the value measured with a DC ammeter in half-wave rectification.2. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.3. The AC coil resistance is a reference value only.4. Operating characteristics were measured at a coil temperature of 23°C.5. The maximum voltage capacity was measured at an ambient temperature of 23°C.*There is variation between products, but actual values are 80% maximum.Contact Ratings

Number of poles (contact configuration)	2-pole (DPDT)
Contact structure	Single
Load	Resistive load	Inductive load (cos φ = 0.4, L/R = 7 ms)
Rated load	3 A at 220 VAC3 A at 24 VDC	0.8 A at 220 VAC1.5 A at 24 VDC
Rated carry current	3 A
Maximum switching voltage	250 VAC, 125 VDC
Maximum switching current	3 A
Maximum switching power	660 VA72 W	176 VA36 W
Contact material	Au plating + Ag

Characteristics

Contact resistance*1		50 mΩ max.
Set	Operate time*2	AC: 30 ms max., DC: 15 ms max.
	Minimum pulse width	AC: 60 ms, DC: 30 ms
Reset	Release time*2	AC: 30 ms max., DC: 15 ms max.
	Minimum pulse width	AC: 60 ms, DC: 30 ms
Maximumswitchingfrequency	Mechanical	18,000 operations/h
	Rated load	1,800 operations/h
Insulation resistance*3		100 MΩ min.
Dielectricstrength	Between coil and contactsBetween contacts ofdifferent polarity	1,500 VAC at 50/60 Hz for 1 min
	Between contacts of thesame polarity	1,000 VAC at 50/60 Hz for 1 min
	Between set/reset coils
Vibrationresistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shockresistance	Destruction	1,000 m/s2
	Malfunction	200 m/s2
Endurance	Mechanical	100,000,000 operations min. (switching frequency: 18,000 operations/h)
	Electrical*4	200,000 operations min. (at rated load, switching frequency: 1,800operations/h)
Failure rate P value (reference value)*5		1 mA at 1 VDC
Ambient operating temperature*6		-55 to 60°C
Ambient operating humidity		5% to 85%
Weight		Approx. 30 g

Note: The data shown above are initial values.*1.Measurement conditions: 1 A at 5 VDC using the voltage drop method.*2.Measurement conditions: With rated operating power applied, not including contact bounce.*3.Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.*4.Ambient temperature condition: 23°C*5.This value was measured at a switching frequency of 120 operations per minute.*6.With no icing or condensation.MYQ/MYH Miniature Power Sealed RelaysOperating coil (AC)

Ratedvoltage(V)		Rated current(mA)		Coilresistance(Ω)	Coil inductance (H)		Mustoperatevoltage(V)*1	Mustreleasevoltage(V)*2	Maximumvoltage(V)	Powerconsumption(VA, W)
		50 Hz	60 Hz		ArmatureOFF	ArmatureON
AC	24	53.8	46	180	0.69	1.3	80%max.	30%min.	110%max. ofratedvoltage	Approx. 0.9to 1.3(at 60 Hz)
	100/110	11.7/12.9	10/11	3,750	14.54	24.6
	110/120	9.9/10.8	8.4/9.2	4,430	19.2	32.1
	200/220	6.2/6.8	5.3/5.8	12,950	54.75	91.07
	220/240	4.8/5.3	4.2/4.6	18,790	83.5	136.4
DC	12	75		165	0.734	1.37		10%min.		Approx. 0.9
	24	36.9		650	3.2	5.72
	48	18.5		2,600	10.6	21.0
	100/110	9.1/10		11,000	45.6	86.0

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20%for AC rated current and ±15% for DC coil resistance.2. The AC coil resistance and coil inductance values are for reference only.3. Operating characteristics were measured at a coil temperature of 23°C.4. The maximum voltage capacity was measured at an ambient temperature of 23°C.*1.There is variation between products, but actual values are 80% maximum. To ensure operation, apply at least 80% ofthe rated value.*2.There is variation between products, but actual values are 30% minimum for AC and 10% minimum for DC. To ensurerelease, use a value that is lower than the specified value.Contact RatingsPlastic Sealed Relays: MYQ

Number of poles (contact configuration)	4-pole (4PDT)
Contact structure	Single/bifurcated
Load	Resistive load	Inductive load (cos φ = 0.4, L/R = 7 ms)
Rated load	1 A at 220 VAC1 A at 24 VDC	0.5 A at 220 VAC0.5 A at 24 VDC
Rated carry current	1 A
Maximum switching voltage	250 VAC125 VDC
Maximum switching current	1 A
Maximum switching power	220 VA24 W	110 VA12 W
Contact material	Au plating + Ag

Hermetically Sealed Relays: MYH

Number of poles(contact configuration)	4-pole (4PDT)
Contact structure	Single		Bifurcated
Load	Resistive load	Inductive load(cos φ = 0.4,L/R = 7 ms)	Resistive load	Inductive load(cos φ = 0.4,L/R = 7 ms)
Rated load	3 A at 110 VAC3 A at 24 VDC	0.8 A at 110 VAC1.5 A at 24 VDC	3 A at 110 VAC3 A at 24 VDC	0.8 A at 110 VAC1.5 A at 24 VDC
Rated carry current	3 A
Maximum switching voltage	125 VAC125 VDC
Maximum switching current	3 A
Maximum switching power	330 VA72 W	88 VA36 W	330 VA72 W	88 VA36 W
Contact material	Au plating + Ag

Characteristics

Model		MYQ	MYH
Contact resistance*1		50 mΩ max.
Operate time*2		20 ms max.
Release time*2		20 ms max.
Maximumswitchingfrequency	Mechanical	18,000 operations/h
	Rated load	1,800 operations/h
Insulation resistance*3		100 MΩ min.
Dielectricstrength	Between coil andcontacts	1,500 VAC at 50/60 Hz for 1 min	1,000 VAC at 50/60 Hz for 1 min
	Between contactsof different polarity	1,500 VAC at 50/60 Hz for 1 min	1,000 VAC at 50/60 Hz for 1 min
	Between contactsof the same polarity	1,000 VAC at 50/60 Hz for 1 min	700 VAC at 50/60 Hz for 1 min
Vibrationresistance	Destruction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
	Malfunction	10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shockresistance	Destruction	1,000 m/s2
	Malfunction	200 m/s2
Endurance	Mechanical	Single contacts:AC: 50,000,000 operations min.,DC: 100,000,000 operations min.Bifurcated contacts:5,000,000 operations min.,DC: 5,000,000 operations min.(switching frequency: 18,000operations/h)	Single contacts:50,000,000 operations min.Bifurcated contacts:5,000,000 operations min.(switching frequency: 18,000operations/h)
	Electrical*4	Single contacts:200,000 operations min.Bifurcated contacts:100,000 operations min.(at rated load, switching frequency:1,800 operations/h)	Single contacts:100,000 operations min.Bifurcated contacts:50,000 operations min.(at rated load, switching frequency:1,800 operations/h)
Failure rate P Level (referencevalue)*5		Single contacts: 1 mA at 1 VDCBifurcated contacts: 100 μA at 1 VDC	Single contacts: 100 μA at 1 VDCBifurcated contacts: 100 μA at 100 mVDC
Ambient operating temperature*6		-55 to 60°C	-25 to 60°C
Ambient operating humidity		5% to 85%
Weight		Approx. 35 g	Approx. 50 g

Note: The data shown above are initial values.*1.Measurement conditions:1 A at 5 VDC using the voltage drop method.*2.Measurement conditions:With rated operating power applied, not including contact bounce.Ambient temperature condition:23°C*3.Measurement conditions:For 500 VDC applied to the same location as for dielectric strength measurement.*4.Ambient temperature condition:23°C*5.This value was measured at a switching frequency of 120 operations per minute.*6.With no icing or condensation.Common Options (Order Separately)CharacteristicsSocketsPlease click image to enlarge (open in a new window).Socket AccessoriesFor Front-connecting SocketsShort Bars

Application	Applicablesockets	Model	Maximumcarry current	Ambient operatingtemperature	Ambient operatinghumidity
Bridging contactterminals(common)	PYF-08-PU(-L)PYF-14-PU(-L)	PYDN-7.75-020[]	20 A	-40 to 70°C	5% to 85%
		PYDN-7.75-030[]
		PYDN-7.75-040[]
		PYDN-7.75-200[]
	PYFZ-08PYF08A*	PYD-025B[]	20 A(However,18 A when 70°C)	-40 to 70°C(with no icing orcondensation)	45% to 85%(with no icing orcondensation)
		PYD-085B[]
	PYFZ-14PYF14A*	PYD-026B[]
		PYD-086B[]
		PYD-020B[]
		PYD-030B[]
For Coil terminals	PYF-08-PU(-L)PYF-14-PU(-L)	PYDN-31.0-080[]	20 A	-40 to 70°C	5% to 85%
	PYF08S	PYDM-08S[]	10 A	-40 to 70°C	5% to 85%
	PYF14S	PYDM-14S[]	10 A	-40 to 70°C	5% to 85%

*Scheduled to be discontinued in March 2021.Certified StandardsCSA certification (File No. LR031928)

Model	Ratings	Class number	Standard number
PYF-08-PU	10 A, 250 V	3211 07	CSA C22.2 No14
PYF-14-PU	6 A, 250 V*
PYF08S	10 A, 250 V
PYF14S	5 A, 250 V
PYFZ-08(-E)	10 A, 250 V
PYFZ-14(-E)	6 A, 250 V
PY[]PYF[]A(-E)	7 A, 250 V

* When power is supplied to all four poles, use with a total power current that does not exceed 20 A.UL certification (File No. E87929)

Model	Ratings	Standard number	Category	Listed/Recognized
PYF-08-PU	10 A, 250 V	UL508	SWIV2	Recognition
PYF-14-PU	6 A, 250 V*
PYF08SPYF14S	10 A, 250 V
PYFZ-08(-E)	10 A, 250 V
PYFZ-14(-E)	6 A, 250 V
PY[]PYF[]A(-E)	7 A, 250 V

* When power is supplied to all four poles, use with a total power current that does not exceed 20 A.TÜV Rheinland certification

Model	Ratings	Standard number	Certification No.
PYF-08-PU	10 A, 250 V*	EN 61984	R50327595
PYF-14-PU	6 A, 250 V
PYFZ-08(-E)	10 A, 250 V		R50405329
PYFZ-14(-E)	6 A, 250 V

*Ratings are for an ambient temperature of 55°C or below. At an ambient temperature of 70°C, the value is 7 A.VDE certification

Model	Standard number	Certification No.
PYF08S	VDE0627 (EN61984)	40015509
PYF14

 

Order Code