E3Z Compact Photoelectric Sensor with Built-in Amplifier
Compact housing size and high-power LED for excellent performance-size ratio and best value-performance ratio for standard applications.
- Minimal optical axis deviation for easy alignment
- IP67 and IP69K for highest water resistance
- Intensive shielding for highest noise immunity (EMC)
- Multiple molding housing for high mechanical resistance
Specification
l
| Sensing method | Through-beam | Retro-reflectivewith MSRfunction | Diffuse-reflective | (Narrow-beamModels) | |||||
|---|---|---|---|---|---|---|---|---|---|
| Model | NPNoutput | Pre-wired | E3Z-T61 | E3Z-T62 | E3Z-T61A | E3Z-R61 | E3Z-D61 | E3Z-D62 | E3Z-L61 |
| Connector(M8) | E3Z-T66 | E3Z-T67 | E3Z-T66A | E3Z-R66 | E3Z-D66 | E3Z-D67 | E3Z-L66 | ||
| PNPoutput | Pre-wired | E3Z-T81 | E3Z-T82 | E3Z-T81A | E3Z-R81 | E3Z-D81 | E3Z-D82 | E3Z-L81 | |
| Connector(M8) | E3Z-T86 | E3Z-T87 | E3Z-T86A | E3Z-R86 | E3Z-D86 | E3Z-D87 | E3Z-L86 | ||
| Sensing distance | 15 m | 30 m | 10 m | 4 m (100mm) *1(when usingE39-R1S)3 m (100mm) *1(when usingE39-R1) | 100 mm(whitepaper:100 ×100 mm) | 1 m(whitepaper:300 ×300 mm) | 90 + 30 mm(white paper,100 x 100mm) | ||
| Spot diameter(reference value) | --- | (2.5 dia. Andsensingdistanceof 90 mm) | |||||||
| Standard sensing object | Opaque: 12-mm dia. min. | Opaque:75-mmdia. min. | --- | ||||||
| Minimum detectable object(reference value) | --- | 0.1 mm(copperwire) | |||||||
| Differential travel | --- | 20% max. of settingdistance | Refer toEngineeringdata onCatalog. | ||||||
| Directional angle | Both emitter and receiver:3 to 15° | 2 to 10° | --- | ||||||
| Light source (wavelength) | Infrared LED(870 nm) | Red LED(660 nm) | Red LED(660 nm) | Infrared LED(860 nm) | Red LED(650 nm) | ||||
| Current consumption | 35 mA max. (Emitter: 15 mAmax., Receiver: 20 mA max.) | 30 mA max. | |||||||
| Protection circuits | Reversed power supply polarityprotection, Output short-circuitprotection, and Reversed outputpolarity protection | Reversed power supply polarity protection, Outputshort-circuit protection, Mutual interferenceprevention, and Reversed output polarityprotection | |||||||
| Response time | Operateor reset:1 msmax. | Operateor reset:2 msmax. | Operate or reset: 1 ms max. | ||||||
| Degree of protection | IEC, IP67 | ||||||||
| Connection method | Pre-wired cable (standard length: 2 m and 0.5 m), Connector (M8) | ||||||||
| Weight(packedstate) | Pre-wired cable(2 m) | Approx. 120 g | Approx. 65 g | ||||||
| Connector | Approx. 30 g | Approx. 20 g | |||||||
| Material | Case | PBT (polybutylene terephthalate) | |||||||
| Lens | Modified polyarylate | Methacrylicresin | Modified polyarylate | ||||||
| Sensing method | Retro-reflective for clear, plastic bottles (without MSR function) | ||||
|---|---|---|---|---|---|
| Model | NPN output | E3Z-B61 | E3Z-B66 | E3Z-B62 | E3Z-B67 |
| PNP output | E3Z-B81 | E3Z-B86 | E3Z-B82 | E3Z-B87 | |
| Sensing distance | 500 mm (80 mm) *1 (using E39-R1S) | 2 m (500 mm) *1 *2 (using E39-R1S) | |||
| Standard sensing object | Opaque materials, 75mm dia. min.(Standard detectable object:glass Cylinder 15mm dia. thickness 1.1mm length50mm, and the transmission factor 92% or less in wave length 660nm) | ||||
| Light source (wavelength) | Red LED (660 nm) | ||||
| Current consumption | 30 mA max. | ||||
| Protection circuits | Reversed power supply polarity protection, Output short-circuit protection,Mutual interference prevention, and Reversed output polarity protection | ||||
| Response time | Operate or reset: 1 ms max. | ||||
| Degree of protection | IEC, IP67 | ||||
| Connection method | Pre-wired cable(standard length:2 m and 0.5 m) | Connector(M8, 4 pins) | Pre-wired cable(standard length:2 m and 0.5 m) | Connector(M8, 4 pins) | |
| Weight(packedstate) | Pre-wired cable (2 m) | Approx. 65 g | |||
| Standard Connector | Approx. 20 g | ||||
| Material | Case | PBT (polybutylene terephthalate) | |||
| Lens | Modified polyarylate | ||||
| Sensing method | Transparent glass Limited-reflective(for transparent object detection ) | ||
|---|---|---|---|
| Model | NPN output | E3Z-L63 | E3Z-L68 |
| PNP output | E3Z-L83 | E3Z-L88 | |
| Sensing distance | 30±20 mm (transparent glasses 100 × 100 mm) | ||
| Spot diameter (reference value) | 2-mm dia. min. (at sensing distance of 30 mm) | ||
| Minimum detectable object(reference value) | 0.1 mm dia. (copper wire) | ||
| Light source (wavelength) | Red LED (660 nm) | ||
| Current consumption | 30 mA max. | ||
| Protection circuits | Power supply reverse polarity protection, Output short-circuit protection,Mutual interference prevention, Reverse output polarity protection | ||
| Response time | Operate or reset: 1 ms max. | ||
| Degree of protection | IEC, IP67 | ||
| Connection method | Pre-wired (standard length: 2 m) | M8 connector | |
| Weight(packedstate) | Pre-wired cable (2 m) | Approx. 65 g | |
| Standard Connector | Approx. 20 g | ||
| Material | Case | PBT (polybutylene terephthalate) | |
| Lens | Modified polyarylate | ||
Oil-resistant
| Sensing method | Through-beam | Retro-reflective | Diffuse-reflective | |||
|---|---|---|---|---|---|---|
| Model | NPNoutput | Pre-wiredModels | E3Z-T61K | E3Z-R61K | E3Z-D61K | E3Z-D62K |
| M8 Pre-wiredconnector | E3Z-T61K-M3J | E3Z-R61K-M3J | E3Z-D61K-M3J | E3Z-D62K-M3J | ||
| PNPoutput | Pre-wiredModels | E3Z-T81K | E3Z-R81K | E3Z-D81K | E3Z-D82K | |
| M8 Pre-wiredconnector | E3Z-T81K-M3J | E3Z-R81K-M3J | E3Z-D81K-M3J | E3Z-D82K-M3J | ||
| Sensing distance | 15 m | 3 m (150 mm) *(when using E39-R1S)2 m (100 mm) *(when using E39-R1) | 100 mm(white paper:100 × 100mm) | 1 m(white paper:300 × 300mm) | ||
| Standard sensing object | Opaque: 12-mm dia. min. | Opaque:75-mm dia. min. | --- | |||
| Differential travel | --- | 20% max. of setting distance | ||||
| Directional angle | Both emitter and receiver:3 to 15 ° | 2 to 10 ° | --- | |||
| Light source (wavelength) | Infrared LED (870 nm) | Red LED (660 nm) | Infrared LED (860 nm) | |||
| Current consumption | 35 mA max. (Emitter: 15 mAmax., Receiver: 20 mA max.) | 30 mA max. | ||||
| Protection circuits | Reversed power supplypolarity protection, Outputshort-circuit protection,and Reversed outputpolarity protection | Reversed power supply polarity protection, Outputshort-circuit protection, Mutual interferenceprevention, and Reversed output polarity protection | ||||
| Response time | Operate or reset: 1 ms max. | |||||
| Degree of protection | IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof),excluding cables and connectors | |||||
| Connection method | Pre-wired cable (standard length: 2 m), M8 Pre-wired Connector | |||||
| Weight(packedstate) | Pre-wired cable (2 m) | Approx. 120 g | Approx. 65 g | |||
| Connector (M8, 4 pins) | Approx. 50 g | Approx. 30 g | ||||
| Material | Case | PBT (polybutylene terephthalate) | ||||
| Lens | Modified polyarylate | Methacrylic resin | Modified polyarylate | |||
Common
| Power supply voltage | 12 to 24 VDC±10%, ripple (p-p): 10% max. |
|---|---|
| Control output | Load power supply voltage: 26.4 VDC max., Load current: 100 mA max.Residual voltage: Load current of less than 10 mA: 1 V max.Load current of 10 to 100 mA: 2 V max.Open collector output (NPN/PNP depending on model)Light-ON/Dark-ON selectable |
| Sensitivity adjustment | One-turn adjuster |
| Ambient illumination(Receiver side) | Incandescent lamp: 3,000 lx max.Sunlight: 10,000 lx max. |
| Ambient temperaturerange | Operating: -25 to 55°C, Some connector models: -40°C to 55°C * (with no icing orcondensation)Storage: - 40 to 70 °C (with no icing or condensation) |
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
| Insulation resistance | 20 MΩ min. at 500 VDC |
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 min |
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Zdirections |
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
| Indicator | Operation indicator (orange)Stability indicator (green)Through-beam Emitter has power indicator (orange) only. |
| Accessories | Instruction manual (Neither Reflectors nor Mounting Brackets are provided with any ofthe above models.) |
* The ambient temperature range during operation for connector models depends on the model. For the E3Z-T66/T86/R66/R86, the range is −40°C to 55°C. For the E3Z-D66/D86/D67/D87, the range is −30°C to 55°C. For other connectormodels, the range is −25°C to −55°C.The sensing distance for Retro-reflective Models (E3Z-R66/R86) between −40°C to −25°C, however, will be as follows(not the values in the table): With E39-R1S: 3 m (100 mm), With E39-R1: 2 m (100 mm).Also, use the XS3F-M42[]-4[][]-L Sensor I/O Connector (PUR cable) for applications between −25°C to −40°C. (Referto Catalog.)
