Product Categories
Import placeholder for 13960

WL-N / WLG Limit Switch Vertical type

Cảm ơn bạn đã quan tâm đến sản phẩm của NTN.
Yêu cầu báo giá xin gửi Email

Mr. Nam:           

Ms. Vân:             

Category:

General-purpose Switches

A type with operation indicators for easily confirming operation is available

Indicates the operation status of the switches using LEDs and neon lamps.

WL-N / WL Features 3

Selectable based on wiring specifications

WL-N / WL Features 4

Environment-resistant Limit Switches

Ambient operating temperature of 5°C to 120°C: Heat-resistant type (WL[]-TH-N/WL[]-TH)
Ambient operating temperature of -40°C to 40°C: Cold-resistant type (WL[]-TC-N/WL[]-TC)

Select based on the operating environment

 

Outdoor use: Weather-resistant type (WL[]-P1-N/WL[]-P1)
Chemicals and oils: Corrosion-resistant type (WL[]-RP-N/WL[]-RP)
Coolant drops and mist: Coolant-resistant type (WL[]-RP60-N/WL-RP60)
Mist
Molded terminal 139 type (WL[]-139-N/WL[]-139)
The SC connector can be removed, so it is possible to use flexible conduit for the cable.
(WL[]-RP40-N/WL-RP40)
Constant water drops and mist Molded terminal 140 type (WL[]-140-N/WL[]-140)
Constant water drops or splattering cutting powder
Molded terminal 141 type (WL[]-141-N/WL[]-141)
Molded terminal 145 type (WL[]-145-N/WL[]-145)

 

Spatter-prevention Switches

Structure designed for use in spattering environments from welding (Typical model: WLCA2-LDS-N)

WL-N / WL Features 9

Long-life Switches

Mechanical structure featuring mechanical durability of more than 30 million operations (WLMCA2-N)

WL-N / WL Features 11

Specification

Screw terminals

Without Operation Indicator

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1251031.51052.5
25010211031.5
500101.50.831.50.8
DC81063106
141063106
3064364
1250.80.20.20.80.2
2500.40.10.10.40.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1255
2505
DC1250.4
2500.2
 

With Operation Indicator (LED)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1151031.51052.5
DC121063106
2464364
48321.530.2
1150.80.20.80.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1155
DC1150.4
 

With Operation Indicators (Neon Lamps)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1251031.51052.5
25010211031.5
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1255
2505
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Allowable Inrush Current/Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Inrush currentNC30 A max.15 A max.
NO20 A max.10 A max.
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DCApprox. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VACApprox. 1.9 mA at 250 VAC
 

Direct-wired connector and Pre-wired Connector Type

Connector DC Specifications: With Operation Indicators (LEDs)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
DC123333
243333
48421.532
1150.80.20.20.80.2
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
DC1150.4
 

Connector AC Specifications: With Operation Indicators (LEDs)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC115331.5332.5
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1153
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DCApprox. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VACApprox. 1.9 mA at 250 VAC
 

Characteristics

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Permissible operatingfrequencyMechanical120 operations/minute
Electrical30 operations/minute
Rated frequency50/60 Hz
Permissible operating speed1 mm/s to 1 m/s (in case of WLCA2-N)
Insulation resistance100 MΩ min. (at 500 VDC)
Contact resistance25 mΩ max. (initial value for the built-in switch)
Vibration resistanceMalfunction10 to 55 Hz, 1.5-mm double amplitude
ShockDestruction1,000 m/s2 max.
Malfunction300 m/s2 max. *2
Durability *1Mechanical15,000,000 operations min.10,000,000 operations min.
Electrical750,000 operations min. (3 A at 250VAC, resistive load), but for high-precision models: *3500,000 operations min. (3 A at 250VAC, resistive load), but for high-precision models: *3
Ambient operating temperature-10 to +80°C (with no icing)
Ambient operating humidity35 to 95%RH
Degree of protectionIP67
WeightApprox. 255 g (in case of WLCA2-N)Approx. 270 g (in case of WLGCA2)
 
 
Note: The above figures are initial values.*1. The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.Contact your OMRON sales representative for more detailed information on other operating environments.*2. Except Switches with Flexible Rod Actuators.*3. In case of Screw terminals without operation indicators.
 
 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Wiring SpecificationsScrewterminalsDirect-wire connector/Pre-wired ConnectorModelsScrewterminalsDirect-wire connector/Pre-wired ConnectorModels
DielectricstrengthBetween terminalsof the same polarity1,000 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *600 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *
Between current-carrying metal partand ground2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
Between eachterminal and non-current-carryingmetal part2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
 
* Excluding those with operation indicators.

Environment-resistant Limit Switches

Ratings

Screw terminals/Direct-wire cable

Without Operation Indicator

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1251031.51052.5
25010211031.5
500101.50.831.50.8
DC81063106
141063106
3064364
1250.80.20.20.80.2
2500.40.10.10.40.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1255
2505
DC1250.4
2500.2
 

With Operation Indicator (LED)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1151031.51052.5
DC121063106
2464364
48321.530.2
1150.80.20.80.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1155
DC1150.4
 

With Operation Indicators (Neon Lamps)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1251031.51052.5
25010211031.5
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1255
2505
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Allowable Inrush Current/ Minimum applicable load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Inrush currentNC30 A max.15 A max.
NO20 A max.10 A max.
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DCApprox. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VACApprox. 1.9 mA at 250 VAC
 

Characteristics

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Permissible operatingfrequencyMechanical120 operations/minute
Electrical30 operations/minute
Rated frequency50/60 Hz
Permissible operating speed1 mm/s to 1 m/s (in case of WLCA2-N)
Insulation resistance100 MΩ min. (at 500 VDC)
Contact resistance25 mΩ or less (default value, built-in switch only)
Vibration resistanceMalfunction10 to 55 Hz, 1.5-mm double amplitude *2
ShockDestruction1,000 m/s2 max.
Malfunction300m/s2 max. *2
Durability *1Mechanical15,000,000 operations min.10,000,000 operations min. *3
Electrical750,000 operations min. (3 A at 250VAC, resistive load) *4500,000 operations min. (3 A at 250VAC, resistive load) *4
Ambient operating temperature-10 to +80°C (with no icing) *5
Ambient operating humidity35 to 95%RH
Degree of protectionIP67
WeightApprox. 250 g (for WLCL-TH-N)Approx. 250 g (for WLCL-TH-N)
 
 
Note: The above figures are initial values.*1. The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.Contact your OMRON sales representative for more detailed information on other operating environments.*2. Except Switches with Flexible Rod Actuators.*3. 500,000 operations min. for Weather-resistant models.*4. In case of models without operation indicators.*5. For low-temperature models this is -40°C to +40°C (with no icing). For heat-resistant models the range is +5°C to120°C.
 
 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Wiring SpecificationsScrew terminals/Direct-wire cable modelsScrew terminals/Direct-wire cable models
DielectricstrengthBetween terminals of the same polarity1,000 VAC, 50/60 Hz for 1 min *600 VAC, 50/60 Hz for 1 min *
Between current-carrying metal partand ground2,200 VAC, 50/60 Hz for 1 min1,500 VAC, 50/60 Hz for 1 min
Between each terminal and non-current-carrying metal part2,200 VAC, 50/60 Hz for 1 min1,500 VAC, 50/60 Hz for 1 min
 
* Except models with operation indicators.

Spatter-prevention Switches

Ratings

Screw terminals

With Operation Indicator

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1151031.51052.5
DC121063106
2464364
48321.530.2
1150.80.20.80.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1155
DC1150.4
 

With Operation Indicators (Neon Lamps)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1251031.51052.5
25010211031.5
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1255
2505
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Allowable Inrush Current/Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Inrush currentNC30 A max.15 A max.
NO20 A max.10 A max.
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DCApprox. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VACApprox. 1.9 mA at 250 VAC
 

Pre-wired connectors

Connector DC Specifications: With Operation Indicators (LEDs)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
DC123333
243333
48421.532
1150.80.20.20.80.2
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
DC1150.4
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current
 

Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DC;Approx. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VAC;Approx. 1.9 mA at 250 VAC
 

Characteristics

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Permissible operatingfrequencyMechanical120 operations/minute
Electrical30 operations/minute
Rated frequency50/60 Hz
Permissible operating speed1 mm/s to 1 m/s (for WLCA2-LDS-N)
Insulation resistance100 MΩ min. (at 500 VDC)
Contact resistance25 mΩ max. (initial value for the built-in switch)
Vibration resistanceMalfunction10 to 55 Hz, 1.5-mm double amplitude
ShockDestruction1,000 m/s2 max.
Malfunction300 m/s2 max.
Durability *Mechanical15,000,000 operations min.10,000,000 operations min.
Electrical750,000 operations min. (3 A at 115VAC, resistive load) *2500,000 operations min. (3 A at 115VAC, resistive load) *2
Ambient operating temperature-10 to +80°C (with no icing)
Ambient operating humidity35 to 95%RH
Degree of protectionIP67
WeightApprox. 255 g (in case of WLCA2-LDS-N)Approx. 270 g (in case of WLGCA2-LDS)
 
 
Note: The above figures are initial values.*1. The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.Contact your OMRON sales representative for more detailed information on other operating environments.*2. In case of models with operation indicators (LEDs).
 
 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Wiring SpecificationsScrewterminalsDirect-wire connectorand Pre-wiredConnector ModelsScrewterminalsDirect-wire connectorand Pre-wiredConnector Models
DielectricstrengthBetween terminalsof the same polarity1,000 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *600 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *
Between current-carrying metal partand ground2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
Between eachterminal and non-current carryingmetal part2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
 
* Excluding those with operation indicators.

Long-life Switches

Ratings

Screw terminals

With Operation Indicator

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC1151031.51052.5
DC121063106
2464364
48321.530.2
1150.80.20.80.1
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1155
DC1150.4
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Allowable Inrush Current/Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity/High-precision models (WLG)
Inrush currentNC30 A max.15 A max.
NO20 A max.10 A max.
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLEDNeon lamp
Rated voltage10 to 115 VAC/DC125 to 250 VAC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DC;Approx. 0.5 mA at 115 VAC/DCApprox. 0.6 mA at 125 VAC;Approx. 1.9 mA at 250 VAC
 

Direct-wire connector and Pre-wired Connector Models Type

DC Connector: With Operation Indicators (LEDs)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
DC123333
243333
48421.532
1150.80.20.20.80.2
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
DC1150.4
 

AC Connector: With Operation Indicators (LEDs)

Basic models (WL-N)

 
RatingsNon-inductive load (A)Inductive load (A)
Basic models (WL-N)Basic models (WL-N)
Resistive loadLamp loadInductive loadMotor load
Voltage (V)NCNONCNONCNONCNO
AC115331.5332.5
 

High-sensitivity and High-precision models (WLG)

 
RatingsNon-inductive load (A)
High-sensitivity and High-precision models (WLG)
Resistive load
Voltage (V)NCNO
AC1153
 
 
Note: 1. The above figures are for steady-state currents.2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).3. A lamp load has an inrush current of 10 times the steady-state current.4. A motor load has an inrush current of 6 times the steady-state current.
 

Minimum Applicable Load

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Minimum applicable load5 VDC 1 mA, resistive load, P level5 VDC 1 mA, resistive load, P level
 

Operation Indicator

 
Operation indicator typeLED
Rated voltage10 to 115 VAC/DC
Leakage current(Reference value)Approx. 0.4 mA at 10 VAC/DC;Approx. 0.5 mA at 115 VAC/DC
 

Characteristics

 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Permissible operatingfrequencyMechanical120 operations/minute
Electrical30 operations/minute
Rated frequency50/60 Hz
Permissible operating speed1 mm/sec to 1 m/sec
Insulation resistance100 MΩ min. (at 500 VDC)
Contact resistance25 mΩ max. (initial value for the built-in switch)
Vibration resistanceMalfunction10 to 55 Hz, 1.5-mm double amplitude
ShockDestruction1,000 m/s2 max.
Malfunction300 m/s2 max.
Durability *Mechanical30,000,000 operations min.
Electrical30,000,000 operations min. (10mA at 24 VAC, resistive load)750,000 operations min. (3 A at115 VAC, resistive load)500,000 operations min. (3 A at115 VAC, resistive load)
Ambient operating temperature-10 to +80°C (with no icing)
Ambient operating humidity35 to 95%RH
Degree of protectionIP67
WeightApprox. 255 g (in case ofWLMCA2-LD-N)Approx. 270 g (in case ofWLMGCA2-LD)
 
 
Note: The above figures are initial values.* The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.Contact your OMRON sales representative for more detailed information on other operating environments.
 
 
Operating characteristics typeBasic models (WL-N)High-sensitivity andHigh-precision models (WLG)
Wiring SpecificationsScrewterminalsDirect-wire connectorand Pre-wiredConnector ModelsScrewterminalsDirect-wire connectorand Pre-wiredConnector Models
DielectricstrengthBetween terminalsof the same polarity1,000 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *600 VAC,50/60 Hz for1 min *600 VAC,50/60 Hz for 1 min *
Between current-carrying metal partand ground2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
Between eachterminal and non-current-carryingmetal part2,200 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min1,500 VAC,50/60 Hz for1 min1,500 VAC,50/60 Hz for 1 min
 
* Excluding those with operation indicators.

Common Specifications

General-purpose/Environment-resistant/Spatter-prevention/Long-life Switches

Approved Standards

 
AgencyStandardFile No.Approved models
ULUL508Contact your OMRON representativefor informationContact your OMRON representativefor information
CSA cULCSA C22.2 No.14
TÜV RheinlandEN60947-5-1
CCC (CQC)GB/T14048.5
 

Approved Standard Ratings

UL/cUL, CSA (UL508, CSA C22.2 No.14)

 
SpecificationsApprovedStandards
OperationIndicatorSensor I/O connectorsItem
No indicatorNo ConnectorBasic modelsA6001 A, 125 VDC
High-sensitivity and High-precision modelsB6000.5 A,125 VDC
Pre-wired Connector (AC)Basic, High-sensitivity or High-precision modelsC3003 A, 250 VAC
Pre-wired Connector (DC)Direct-wired Connector (DC)Basic models1 A, 125 VDC
High-sensitivity and High-precision models0.5 A,125 VDC
Neon lampNo ConnectorBasic modelsA30010 A, 250 VAC
High-sensitivity and High-precision modelsB3000.5 A, 250 VAC
Pre-wired Connector (AC)Basic, High-sensitivity or High-precision modelsC3003 A, 250 VAC
LEDNo ConnectorBasic modelsA15010 A, 115 VAC1 A, 115 VDC
High-sensitivity and High-precision modelsB1505 A, 115 VAC0.5 A, 115 VDC
Pre-wired Connector (AC)Basic, High-sensitivity or High-precision modelsC1503 A, 115 VAC
Pre-wired Connector (DC)Direct-wired Connector (DC)Basic models1 A, 115 VDC
High-sensitivity and High-precision models0.5 A, 115 VDC
 

A600 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC240 VAC480 VAC600 VAC10 A60301512631.51.27,200720
 

C300 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC240 VAC2.5 A157.51.50.751,800180
 

A300 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC240 VAC10 A6030637,200720
 

A150 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC10 A6067,200720
 

C150 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC2.5 A151.51,800180
 

B600 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC240 VAC480 VAC600 VAC5 A30157.5631.50.750.63,600360
 

B300 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC240 VAC5 A301531.53,600360
 

B150 Authentication conditions

 
Rated voltageCarrying currentCurrent (A)Volt-ampere (VA)
MakeBreakMakeBreak
120 VAC5 A3033,600360
 

TÜV (EN 60947-5-1)

 
Authentication conditionsSpecification
Direct-wire cable typeWith PrewiredDC connectormodel
No indicatorNeon lampLED
Working load categoryAC-15DC-12AC-15AC-15DC-12DC-12
Rated working voltage (Ue)250 V48 V250 V115 V48 V48 V
Rated working current (Ie)2 A
Conditional short-circuit current100 A
Short-circuit protective device (SCPD)10 A, fuse type gG
Rated insulation voltage (Ui)250 V48 V
Rated impulse dielectric strength (Uimp)4 kV800 V
Pollution degree3
Electric shock protection classClass IClass III
 

CCC (GB/T14048.5)

 
Authentication conditionsSpecification
NoindicatorNeonlampLEDWith PrewiredDC connectormodelWith PrewiredAC connectormodel
Working load categoryAC-15DC-13AC-15AC-15DC-13DC-13AC-15
Rated working voltage (Ue)250 V48 V250 V250 V48 V48 V250 V
Rated working current (Ie)2 A
Conditional short-circuit current1000 A
Short-circuit protective device (SCPD)10 A, fuse type gG
Rated insulation voltage (Ui)250 V

Order Code