Name: EXEN BH CH UH Series Ball vibrator - CÔNG TY TNHH KỸ THUẬT NTN
Brand: EXEN

Compact pneumatic vibrator in a wide range of models and expanded applications

This product is used for the following applications:

01Milling plant: installation to small screening machine made by user
02Prevention of blockage in sodium chloride conveyance chute
03Improvement of buildup of workpiece ejected in screw production line. Improvement of buildup of cutting workpiece ejected. Improvement of resin moulding cutout workpiece ejected

Features

Ball vibrator is a compact vibrator that generates powerful centrifugal force vibration via high-speed rotation of steel ball by compressed air. This vibrator has simple principle and structure and can be used easily. It is generally used for preventing clogging in hopper chute, but the applications are expanded depending on ideas. Frequency and centrifugal force can be freely changed only by operation of air pressure. Depending on the on-site installation conditions, selection can be made from model lineup of BH-A, CH-A, and UH-A, which are different in positions of air supply and exhaust. (Supplying lubricant with an oiler is required)

Frequency and centrifugal force can be easily changed.

A steel ball that rotates at high speed inside the housing with compressed air generates strong centrifugal vibration. Simply operating the pressure of compressed air allows frequency and centrifugal force to be easily changed.

※ Use a lubricator (Oiler) to maintain its performance.

Lightweight and small

The smallest BH8 with the mounting width of 18 mm and the weight of 0.3 kg enables installation in narrow spaces where it is difficult to install a conventional vibrator. (BH8 type can be installed in two directions.) Depending on the on-site installation conditions, selection can be made from model lineup of BH-A, CH-A, and UH-A, which are different in positions of air supply and exhaust. This series can be also used in water because of its high airtightness. (Assuming that exhaust pipe is extended to the atmosphere)

Depending on the on-site installation conditions, selection can be made from model lineup.

Since the intake direction differs depending on the model, it is possible to select the model according to the piping restrictions of the air tube. BH type that can be installed with a single bolt is also available.

Completely airtight waterproof structure

The waterproof structure of this series enables use in watery environments. By attaching a tube connector to the exhaust port (replace the silencer with a tube connector) and extending the intake and exhaust hoses, this vibrator can be attached to an underwater object. (Note: If the exhaust tube is extended, the vibration efficiency will decrease.)

Easy maintenance

Ball can be replaced in all models. Replacement maintenance can be easily conducted by loosening bolts on the side cover, removing the side cover, and the replacing the ball. (Note: If the internal raceway ring is significantly worn, only replacing the ball will not repair the product)

Applications expanded on your idea

Although the ball vibrator is generally used to prevent minor clogging of powder in hopper or chute, it can be utilized as a motor for vibration table used for filling. Applications are expanded on various ideas, such as applying the vibration to eliminate buildup in parts supply line of production lines.

Mounting holes for safety wire are provided as standard

All models of ball vibrator are provided with mounting holes for the fall prevention wire. It is highly recommended to mount the wire to ensure the safety in plant. (Wire is optional)

Pneumatic vibrator manual control panel

CA1 type is a control panel for the manual pneumatic vibrator, which provides easy operation for the pneumatic vibrator and ball vibrator, and piston vibrator. Preparing only air tube and pressure air allows quick operation.

Timer control panel dedicated to solenoid valve

Timer control panel VSE1 corresponds to input power supply AC100V / AC200V. This is a control panel dedicated to the solenoid valve that controls the operating time and the rest time.

Specification

BH/CH/UH

Model	Required to start （MPa）		Frequency (Hz）・Centrifugal force (kN）・Air consumption（m³/min(ANR））															Weight （kg）
	Required to start （MPa）		0.2MPa			0.3MPa			0.4MPa			0.5MPa			0.6MPa
	Vert.	Horz.	Hz	kN	m³/min （ANR）	Hz	kN	m³/min （ANR）	Hz	kN	m³/min （ANR）	Hz	kN	m³/min （ANR）	Hz	kN	m³/min （ANR）
BH8	0.02	0.01	322	0.09	0.04	348	0.13	0.06	432	0.17	0.08	471	0.20	0.09	499	0.22	0.10	0.3
BH10A	0.03	0.01	285	0.13	0.07	324	0.17	0.10	377	0.23	0.12	418	0.28	0.14	451	0.33	0.17	0.5
BH19A	0.06	0.02	174	0.60	0.14	204	0.83	0.19	227	1.02	0.25	245	1.19	0.31	259	1.33	0.37	1.1
CH19A	0.06		162	0.52	0.13	189	0.71	0.18	211	0.89	0.24	228	1.03	0.29	240	1.15	0.35	1.2
CH25A	0.11		110	0.79	0.17	129	1.09	0.23	144	1.36	0.30	155	1.57	0.37	164	1.76	0.43	2.6
CH32A	0.20		-	-	-	104	1.22	0.22	118	1.56	0.28	129	1.87	0.34	137	2.11	0.40	2.4
UH13A	0.03	0.01	264	0.30	0.11	310	0.41	0.15	341	0.50	0.19	366	0.57	0.23	383	0.63	0.28	0.7
UH19A	0.06	0.02	163	0.53	0.13	192	0.73	0.18	214	0.91	0.23	231	1.06	0.29	246	1.20	0.34	1.2
UH25A	0.13	0.02	110	0.67	0.11	127	0.90	0.15	140	1.09	0.19	152	1.28	0.24	162	1.46	0.28	1.9

（Imperial System）

Model	Required to start (PSI)		Frequency(Hz)・Centrifugal Force(kN)						Weight (lb)
	Required to start (PSI)		29PSI			87 PSI
	Vert.	Horz.	VPM	lbf	CFM	VPM	lbf	CFM
BH8	2.90	1.45	19,320	20.2	1.4	29,940	49.5	3.5	0.7
BH10A	4.35	1.45	17,100	29.2	2.5	27,060	74.2	6.0	1.1
BH19A	8.70	2.90	10,440	134.9	4.9	15,540	299.0	13.1	2.4
CH19A	8.70		9,720	116.9	4.6	14,400	258.5	12.4	2.6
CH25A	15.95		6,600	177.6	6.0	9,840	395.7	15.2	5.7
CH32A	29.0		-	-	-	8,220	474.3	14.1	5.3
UH13A	4.35	1.45	15,840	67.4	3.9	22,980	141.6	9.9	1.5
UH19A	8.70	2.90	9,780	119.1	4.6	14,760	269.8	12.0	2.6
UH25A	18.85	2.90	6,600	150.6	3.9	9,720	328.2	9.9	4.2

*Use the product in ambient temperature of 80°C or more. *The above specification is the result under measurement condition of EXEN. The actual data may differ from the above specification depending on the installation conditions. *Pressure required to start may become higher than motion pressure, because the former pressure is a pressure when starting up with the pressure gradually risen at a position 3cm before the vibrator. * Vertical indicates a direction in which a boll rotates vertically, and Horizontal indicates the result of installation with a boll rotates in planar direction. If the installation angle is other than vertical, starting pressure shows a lower trend than vertical.

EXEN BH CH UH Series Ball vibrator

Mr. Nam: 0982 49 47 45